Is the Krohne 7300 ultrasonic flowmeter from Cologne, Germany a good model for natural gas flow meters?

『Natural gas flowmeter model』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Main features and technical parameters of natural gas flowmeter

The main features of natural gas flowmeter include: high measurement accuracy: manufactured using the Karman vortex street principle to ensure the accuracy of measurement results.. Wide range: The dynamic measurement range is wide, with a range ratio of 1:10, suitable for measurement needs in different flow ranges. Low power consumption: The power supply method is flexible, including built-in lithium batteries and external power sources, and the power consumption is relatively low. Easy installation: There are no moving parts inside the instrument, making the installation process simple and fast. Easy to operate: The dashboard displays rich content, including cumulative flow, instantaneous flow, etc., making the operation intuitive and easy to understand. Small pressure loss: The overall structural design is reasonable, effectively reducing pressure loss. Strong corrosion resistance: The instrument body is made of stainless steel material, suitable for measuring corrosive media. The main technical parameters of natural gas flow meters include: caliber range: from DN15 to DN3000mm, meeting the measurement needs of different pipeline sizes. Nominal pressure: ranging from 0.6MPa to 42MPa, suitable for measurement in high-pressure environments. Operating temperature: 180 ℃ to+500 ℃, suitable for measurement under extreme temperature conditions. Accuracy: between ± 0.2% and ± 1.5% FS, ensuring the accuracy of measurement results. Power supply mode: Built in 3.6VDC lithium battery and external 24VDC, providing flexible power supply options. Output signal: It can be a family call 4-20mA two-wire megawatt Kai system, pulse 0-1000HZ or RS232/RS485

2. Is the Krohne 7300 ultrasonic flowmeter from Cologne, Germany easy to use? The Krohne OPTISONIC 7300 ultrasonic flowmeter from Cologne, Germany performs well in natural gas, process gas, and utility gas applications, especially suitable for standard volume flowmeters. This device is not affected by the characteristics of the medium, does not require maintenance, has no pressure loss, and has a large dynamic range. Its flange connection covers a wide range, from DN50 to 1000, and also has 2 to 40 "options. The maximum pressure can reach PN450/ASME Cl 2500, or welding connection can be used. Equipment equipped with 3 channels of 4... 20mA, HART, Modbus, FF ® Interface to meet various communication needs. As a universal 2-channel code ear front diameter ultrasonic gas flowmeter, the OPTISONIC 7300 is suitable for process and utility gas measurement in oil and gas refineries, chemical or petrochemical industries, as well as for non metering natural gas applications or various applications of compressed air, mixed or flue gas (up to+180 ° C/+356 ° F). The device adopts the principle of transmission time difference measurement and can provide high performance within a wide range of key flow rates (up to DN600/24 ", with a range ratio of up to 100:1). By using titanium transducers for focusing, the equipment can balance process fluctuations and avoid acoustic feedback, ensuring measurement accuracy. The measured volumetric flow rate can always be calculated to standard

『SILVER Official Website SERVICE』