Current position > News detail
『Gasoline quality flowmeter manufacturer』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
What are the components of an electronically controlled fuel system? The electronic gasoline injection system is mainly composed of three parts: air system, fuel system, and control system. Here is the relevant introduction:
1. Definition: Electronic Fuel Injection (EFI) - abbreviated as gasoline injection. It is an advanced fuel injection device adopted by gasoline engines to eliminate carburetors. Electronic control gasoline injection technology has been popularized in gasoline engines to improve the atomization of liquid fuel during the formation of the gasoline engine mixture. More importantly, it can accurately control the fuel injection amount according to changes in operating conditions to make combustion more complete, thereby increasing power, reducing fuel consumption, and meeting the requirements of emission regulations.
2、 Classification: According to different testing methods for intake flow, it can be divided into three types: quality control key dispersion, speed density, and throttle speed. According to the different mass flow rates of the sock air flow meter used, it can be divided into three types: hot wire type, plate type, and Karman vortex type.
2. Where are vortex flowmeters generally used and who is good at them? KNKE, a well-known American imported vortex flowmeter brand with good customer reputation and fast delivery time, is pleased to answer your question. The manufacturer of vortex flowmeter brand KNKE from the United States is good. The applications of vortex flowmeter are as follows:
1. Water flow measurement of large diameter pipelines. Generally, full tube vortex flowmeters are primarily used to measure the flow rate of water with small to medium diameters, w
2、 Flow measurement of non-conductive liquids. Generally, electromagnetic flowmeters are used for measuring the flow rate of conductive liquids, while in the field of measuring the flow rate of non-conductive liquids, vortex flowmeters occupy a dominant position. Vortex flowmeters have been widely used in food, semiconductor industry, petrochemical industry, and pharmaceuticals, such as toluene, trichloroethylene, ethylene, butane liquid ammonia, methanol, formaldehyde, acetone, etc. In addition, it is also used for pure water and ultra clean water in the semiconductor industry;
3、 The flow rate of various industrial water is primarily measured for the circulation of water, wastewater, and waste liquid in the production processes of industries such as metallurgy, building materials, petroleum, chemical, light industry, and power;
4、 Measurement of some corrosive liquids, such as acids like nitric acid, acetic acid, sulfuric acid, hydrochloric acid, and other chemical solutions;
5、 Measurement of flow rate for some low viscosity oil products, such as kerosene, diesel, gasoline, as well as heavy oil and residual oil whose viscosity decreases after heating. If you feel that reselling or answering correctly would be helpful to you, could you please raise your hand and give a thumbs up to the KNKE vortex flowmeter brand manufacturer in the United States! If you have purchasing needs for vortex flowmeters, please visit